Ceramic Ribbed Pendant light
Vin-CH12701
Find your pendant size
These guides work for any single pendant. Compare them with the sizes in the product’s Dimensions tab: first the shade width, then the hanging height.
Drawn to scale under a 9 ft ceiling: over a table, and where people walk.
Common shade widths at one scale. Compare them with the sizes in the product’s Dimensions tab.
1. Choose a shade width
Center of a room
Add the room’s length and width in feet. The total is a good starting shade width in inches. For a 12 × 14 ft room, 12 + 14 = 26, so look for a shade about 26 in wide.
| Room | Shade width |
|---|---|
| 10 × 10 ft | about 20 in |
| 10 × 12 ft | about 22 in |
| 12 × 12 ft | about 24 in |
| 12 × 14 ft | about 26 in |
| 14 × 16 ft | about 30 in |
| 16 × 18 ft | about 34 in |
| 18 × 20 ft | about 38 in |
If you’re between two sizes, the smaller one is a safe choice. Larger shades need a taller ceiling where people walk underneath (see step 2).
Over a dining table
Choose a shade about 1/2 to 2/3 the width of your table, and at least 12 in narrower than the table. For a round table, use its diameter.
| Table width | Shade width |
|---|---|
| 30 in | 15–18 in |
| 36 in | 18–24 in |
| 42 in | 21–28 in |
| 48 in | 24–32 in |
| 54 in | 27–36 in |
| 60 in | 30–40 in |
Long table? Use two or three pendants, each centered over an equal section of the table. For the widest shade per pendant, divide the table length by the number of pendants and subtract 12 in, then use whichever is smaller: that number or the width guide. Example: an 84 × 42 in table with two pendants gives 84 ÷ 2 − 12 = 30 in, and the width guide gives 21–28 in, so choose two shades about 21–28 in wide.
Over a kitchen island
Compact shades, about 12–18 in wide (roughly a third of the island’s depth), suit most kitchen islands. Use two or three, spaced about 24–30 in apart center to center, and keep each shade at least 6 in from the ends of the island.
Entryway
Use the room rule above, then check the walking clearance in step 2: people walk directly under an entry light. If you can, leave about 4 ft between the shade and the walls. A two-story foyer can take a much larger shade.
Beside the bed
For a pair over nightstands, choose a shade narrower than the nightstand. Hang the bottom of the shade about 42 in above the floor, about where a table lamp’s shade would sit, and keep it beside the bed rather than over the pillows.
2. Check the height
Drop means the distance from the ceiling to the bottom of the shade. It can’t be shorter than the shade height plus the canopy and a few inches of cord, so check the product’s Dimensions and Specifications.
Where people walk
Keep at least 7 ft (84 in) from the floor to the bottom of the shade.
| Ceiling | Longest drop |
|---|---|
| 7 ft 6 in | up to 6 in |
| 8 ft | up to 12 in |
| 9 ft | up to 24 in |
| 10 ft | up to 36 in |
| 11 ft | up to 48 in |
| 12 ft | up to 60 in |
| 14 ft | up to 84 in |
If the shortest drop (see the example below) is more than the drop shown, hang it over furniture instead.
Check one size: an example
Example: a shade 14 in tall. Allow about 5 in for the canopy and a short length of cord, so its shortest drop is about 19 in. With an 8 ft ceiling, a walkway allows up to 12 in, so hang it over a table instead, where the target drop is 30–36 in. Exact canopy and cord details are in the product’s Specifications.
Over a table or island
Over a 30 in dining table, aim for 30–36 in above the tabletop with an 8 ft ceiling, and add about 3 in for each extra foot of ceiling. Over a 36 in counter, aim for 30–36 in. The drop is the number to give your installer.
| Ceiling | Dining table drop | Island drop |
|---|---|---|
| 7 ft 6 in | 24–30 in | 18–24 in |
| 8 ft | 30–36 in | 24–30 in |
| 9 ft | 39–45 in | 36–42 in |
| 10 ft | 48–54 in | 48–54 in |
| 11 ft | 57–63 in | 60–66 in |
| 12 ft | 66–72 in | 72–78 in |
| 14 ft | 84–90 in | 96–102 in |
What to measure
- Room: length and width, in feet
- Table or island: width (or diameter) and length, in inches
- Ceiling: height from the floor, in feet and inches
- Furniture height: tabletop or counter, in inches
Before you order
- Exact sizes: Shade width, shade height, cord length and canopy size are listed in the product’s Dimensions and Specifications.
- Sloped ceiling: Send us the ceiling angle before ordering and we’ll confirm the fit.
- Light: One pendant rarely lights a whole room. In a larger room, add lamps for reading or task light.
Not sure which size fits? Send us your measurements at support@vinlighting.com.
15% off every order · 25% off $1,999+
- In stock, ready to ship
- Backordered, shipping soon
Pairs well with
- Elegant Design: Handcrafted bone china shades with intricate ribbed patterns, adding a decorative touch and casting a warm, inviting glow.
- Premium Materials: Made from high-quality ceramics, metal, and iron for durability and long-lasting beauty.
- Timeless Elegance: The ribbed ceramic design and matching ceiling rose complete the chic, cohesive look of your space.
- Convenient Installation: Hardwired and compatible with common wall switches for easy control.
- Flexible Wire Length: Comes with a 150cm / 59" wire, extendable upon request for greater flexibility in installation.
Meet Vinlighting's Ceramic Ribbed Pendant Series—crafted in delicate bone china with sculpted ribbed textures. Designed to hang solo or in clusters, each pendant casts a soft glow and adds refined charm to dining rooms, hallways, and more.
Dia 13cm x H 21cm / Dia 5.1" x H 8.3" (Bulb: E12)
Dia 18cm x H 26cm / Dia 7.1" x H 10.2" (Bulb: E26)
Dia 24cm x H 36cm / Dia 9.4" x H 14.1" (Bulb: E26)

3-Light Size: Dia 24cm x H 36cm / Dia 9.4" x H 14.1" (Bulb: E12)

5-Light Size: Dia 27cm x H 44cm / Dia 10.6" x H 17.3" (Bulb: E12)

7-Light Size: Dia 31cm x H 75cm / Dia 12.2" x H 29.5" (Bulb: E12)

12-Light Size: Dia 42cm x H 85cm / Dia 16.5" x H 33.4" (Junction box: 15.7") (Bulb: E12)
18-Light Size: Dia 52cm x H 15cm / Dia 20.4" x H 41.3" (Junction box: 19.7") (Bulb: E12)
- Material: ceramics
- Shade Material: ceramics
- Light Source: Bulb-based.
- Bulb Base: Small E12 / Large E26.
- Bulbs Included: Yes.
- Maximum Wattage: 40W per socket.
- Voltage: AC 110–240V, suitable for standard U.S. household voltage.
- Dimmable: Depends on compatible bulbs and dimmer switch.
- Location Rating: Indoor dry locations only. Keep away from direct moisture, water, and excessive humidity.
- IP Rating: IP20.
- Installation: Hardwired ceiling mount. Professional installation is recommended.
- Power Source: Hardwired.
- Adjustable Height: Yes.
- Control Method: Compatible with a standard wall switch. Switch is not included.
- Cord Length: The fixture includes a 59-inch cord, but we can extend it to your preference—just let us know!
- Certification: Safety-tested electrical components. UL / ETL / CE / SAA certification available where applicable.
- Package Includes: Light fixture, mounting hardware, installation instructions.
Optional Dimmable Bulb
Add dimming to your light
Choose a remote-control bulb with three light colors, or a warm white bulb for your wall dimmer. We’ll match the bulb base to your fixture.
- Two bulb options
- Base matched to your fixture
- Replaces the standard bulb
Choose your bulb
Remote bulb
Select “Compatible Remote Bulb”
Adjust brightness and switch between warm, neutral and cool white with the included remote.
Not for wall dimmers. Leave the wall switch or cord switch on and use the remote.
Wall-dimmer bulb
Select “Compatible TRIAC Bulb”
Dims with most standard U.S. wall dimmers. One light color: 3000K warm white.
Wall dimmer not included. Your electrician can confirm it suits your dimmer.
Remote bulb light settings
- 3000KWarm whiteSoft and cozy
- 4000KNeutral whiteClean and balanced
- 6000KCool whiteCool and crisp
Color samples are illustrative; the actual light may look different in your room.
How to add it
-
01
Add a compatible light fixture to your cart.
-
02
On the fixture’s product page, find “Pairs well with” and select Remote-Control Dimmable Bulb.
-
03
Choose the remote bulb or the TRIAC bulb, then check out with both items.
What’s included
Each add-on includes one dimmable bulb, shipped in the same package as your light. The remote bulb comes with its own remote. If your fixture normally comes with a standard bulb, we’ll send the dimmable one instead; the standard bulb won’t be included.
Remote batteries are included with standard shipping. Orders shipped by air can’t include batteries.
Details and ordering
Compatibility
Recommended for single-bulb fixtures up to 30″ in diameter. Larger fixtures may need more light. Not suitable for fixtures with built-in LEDs. For chandeliers or multi-bulb lights, please check with us first.
More than one light?
Each remote controls one bulb, so every remote bulb comes with its own remote. Ordering several lights? Leave a note at checkout telling us which ones need a bulb.
Add-on only
Available only with a compatible light fixture. Orders for the bulb alone may need to be adjusted or canceled.
Already placed your order?
If your fixture has shipped, contact us before adding a bulb. Extra shipping fees may apply if it needs to be sent separately.
Not sure which bulb suits your light? Contact us before ordering →
Shipping Made Simple
We’ve got you covered with easy and reliable shipping options:
- Free Standard Shipping (4-6 Weeks): Available for all orders in the US and Canada.
- Expedited Shipping (2-4 Weeks): Faster delivery is available—check our Shipping Policy for costs.
Hassle-Free Returns
Your satisfaction is our priority! If you’re not completely happy with your purchase, you can return it within 30 days in new and unused condition for a full refund. (Please note: Paid shipping fees are non-refundable as fulfillment has already been completed.)
To start a return, just email our support team at support@vinlighting.com, and we’ll walk you through the process step by step. For more details, visit our Returns Policy.
Shop with confidence, knowing we’re here to make things right!
