Akari Spherical Pendant Light
Vin-CH02309
AKARI SPHERICAL
Compare sizes
One hardwired pendant over a table or island.
Round: diameter. Rectangle: short side. Between options: furniture height up, ceiling down; width nearest.
Suggested shade width: 12.0–16.0 in15.0–20.0 in16.0–21.3 in18.0–24.0 in20.0–26.7 in21.0–28.0 in22.0–29.3 in24.0–32.0 in27.0–36.0 in30.0–40.0 in33.0–44.0 in36.0–48.0 in42.0–56.0 in48.0–64.0 in
Lamp bottom above surface: 30.0 in30.0 in31.5 in33.0 in34.5 in36.0 in39.0 in42.0 in45.0 in48.0 in30 in33 in36 in39 in42 in
Your shortlist
Height checked for your settings.
Smaller shades feel lighter; larger shades add presence.
30A
Width 11.8 in
Height 11.0 in
40A
Width 15.7 in
Height 14.6 in
45A
Width 17.7 in
Height 16.5 in
50A
Width 19.7 in
Height 17.7 in
55A
Width 21.7 in
Height 20.1 in
60A
Width 23.6 in
Height 20.5 in
75A
Width 29.5 in
Height 28.0 in
80A
Width 31.5 in
Height 29.5 in
90A
Width 35.4 in
Height 32.7 in
100A
Width 39.4 in
Height 36.6 in
120A
Width 47.2 in
Height 44.5 in
Shade and furniture widths to scale. Hanging lengths are illustrative.
See all sizes below, or send us your measurements for help choosing.
All 11 shade sizes
| Model | Width | Shade height |
|---|---|---|
| 30A | 11.8 in30 cm | 11.0 in28 cm |
| 40A | 15.7 in40 cm | 14.6 in37 cm |
| 45A | 17.7 in45 cm | 16.5 in42 cm |
| 50A | 19.7 in50 cm | 17.7 in45 cm |
| 55A | 21.7 in55 cm | 20.1 in51 cm |
| 60A | 23.6 in60 cm | 20.5 in52 cm |
| 75A | 29.5 in75 cm | 28.0 in71 cm |
| 80A | 31.5 in80 cm | 29.5 in75 cm |
| 90A | 35.4 in90 cm | 32.7 in83 cm |
| 100A | 39.4 in100 cm | 36.6 in93 cm |
| 120A | 47.2 in120 cm | 44.5 in113 cm |
How we check size & hanging height
Width: aim around ½–⅔ of the furniture width. If fewer than two in-range models clear the height, we also show the adjacent smaller or larger size, marked Below guide or Above guide. Unmarked models sit within the width guide.
Hanging gap: measured from the furniture surface to the lamp bottom. Auto starts at 30 in, adding 3 in per foot above an 8 ft ceiling. You can choose a different gap above.
Height: available space = ceiling height − furniture height − selected gap. Each shortlisted model needs no more than this available space.
Minimum installed drop includes the 1 in canopy + 10 cm exposed cord + shade. The inch minimums below are rounded up to 0.1 in. Between presets, choose the next taller furniture height and the next lower ceiling height for a conservative check. Use the nearest furniture width for the approximate proportion guide. These checks assume a level ceiling.
| Model | Minimum installed drop |
|---|---|
| 30A | 16.0 in40.54 cm |
| 40A | 19.6 in49.54 cm |
| 45A | 21.5 in54.54 cm |
| 50A | 22.7 in57.54 cm |
| 55A | 25.1 in63.54 cm |
| 60A | 25.5 in64.54 cm |
| 75A | 32.9 in83.54 cm |
| 80A | 34.5 in87.54 cm |
| 90A | 37.7 in95.54 cm |
| 100A | 41.6 in105.54 cm |
| 120A | 49.5 in125.54 cm |
Furniture heights outside 28–42 in, other widths, ceilings outside 7 ft 6 in–14 ft, slopes or multiple pendants? Ask us about your setup.
- In stock, ready to ship
Spend more, save more
Pairs well with
The Washi paper globe brings a soft focal point to a dining room or bedroom. Light filters through the shade, giving the room a warm ambient glow for evening meals or winding down.
A smaller globe makes a quiet accent; a larger one gives the rounded silhouette more presence above the furniture. Use Compare sizes to check the proportions and hanging space before choosing the scale you want.
30A: 11.8" Dia. × 11.0" H (30 × 28 cm)
40A: 15.7" Dia. × 14.6" H (40 × 37 cm)
45A: 17.7" Dia. × 16.5" H (45 × 42 cm)
50A: 19.7" Dia. × 17.7" H (50 × 45 cm)
55A: 21.7" Dia. × 20.1" H (55 × 51 cm)
60A: 23.6" Dia. × 20.5" H (60 × 52 cm)
75A: 29.5" Dia. × 28.0" H (75 × 71 cm)
80A: 31.5" Dia. × 29.5" H (80 × 75 cm)
90A: 35.4" Dia. × 32.7" H (90 × 83 cm)
100A: 39.4" Dia. × 36.6" H (100 × 93 cm)
120A: 47.2" Dia. × 44.5" H (120 × 113 cm)
These are shade dimensions. The shortest standard hardwired drop is the shade height plus 4.94" (12.54 cm), allowing for the canopy and minimum exposed cord. Use Compare sizes to check the hanging space; your installer should confirm the final clearance.
Hardwired · Standard
Connects to ceiling wiring. Have a qualified installer make the electrical connection and secure the fixture.
The standard 118" cord can be shortened during installation. Contact us before ordering if you need a longer cord.
Plug-in · Optional add-on
Uses a wall outlet with a separate 16.4 ft (5 m) cord and inline on/off switch. Choose the cord color and US plug when adding it to the same order.
The cord arrives unattached and needs to be connected by a qualified installer. The pendant still needs secure overhead support and a clear cord route. Hardwired parts are not included with this add-on unless requested before shipment.
Check the hanging space
For the shortest standard hardwired drop, add 4.94" (12.54 cm) to the shade height: a 1" canopy plus at least 10 cm of exposed cord. This applies to all 11 sizes.
Above a table or island, start with 30–36" between the surface and the bottom of the shade. Use Compare sizes to check proportions and clearance. Open walkways need a separate clearance check by your installer.
An English installation guide is included in every package. Watch the installation video on the product page before assembly.
For dry indoor spaces. Handle the paper shade gently; do not force the support frame. If parts are missing or damaged, or the socket feels loose, stop and contact us before installation or use.
Optional Remote-Control Bulb
Add Remote-Control Dimming to Your Light
Adjust brightness and switch between warm, neutral, and cool white with the included remote. No need to figure out the bulb base—we’ll match it to your compatible light fixture.
- Remote included
- 3000K / 4000K / 6000K
- Bulb base matched for you
How to Add It
-
Add a compatible light fixture to your cart.
-
On the fixture’s product page, find “Pairs well with” and select Remote-Control Dimmable Bulb.
-
Add the bulb and check out with both items.
What’s Included
Each add-on includes one compatible dimmable bulb and one remote control, shipped in the same package as your light. If your fixture normally comes with a standard non-dimmable bulb, we’ll send the dimmable one instead—the standard bulb won’t be included.
Brightness & Light Color
Use the remote to adjust brightness or choose one of three white-light settings:
- 3000KWarm WhiteSoft & cozy
- 4000KNeutral WhiteClean & balanced
- 6000KCool WhiteCool & crisp
Color samples are illustrative; the actual light may look different in your room.
The bulb isn’t designed for wall dimmer switches. Use the included remote while the fixture is powered on.
Details & Ordering
Compatibility
Recommended for compatible single-bulb fixtures, especially those 30″ or smaller. Larger fixtures may need more light. Not suitable for fixtures with built-in LEDs. For chandeliers or multi-bulb lights, please check with us first.
More Than One Light?
Ordering several lights? Leave a note at checkout telling us which one needs the bulb. For fixtures using multiple bulbs, contact us first to confirm quantity and compatibility.
Add-On Only
Available only with a compatible light fixture. Orders for the bulb alone may need to be adjusted or canceled.
Already Placed Your Order?
If your fixture has shipped, contact us before adding a bulb. Extra shipping fees may apply if it needs to be sent separately.
Not sure if this bulb will work with your light? Contact us before ordering →
Optional Plug-In Cord
Prefer a Plug-In Pendant?
Want to hang a pendant without hardwiring it to the ceiling? Our plug-in cord offers a convenient way to power compatible single pendant lights from a wall outlet.
- 5 m / approx. 196″ cord
- Inline on/off switch
- 3 mounting hooks included
How to Add It
-
Add your pendant light to your cart.
-
Under “Pairs well with”, select Plug-In Cord with Switch for Pendant Lights (5M / 196″).
-
Choose Black or White and your plug type (US Plug for U.S. outlets). Add the cord to your cart and check out with both items.
What’s Included
Your pendant and plug-in cord arrive in one package with three mounting hooks for routing the cord and supporting a compatible fixture. The cord arrives unattached and must be connected before use.
Details & Ordering
Compatibility
For compatible single-bulb pendants only. Not for chandeliers or multi-light fixtures. For integrated-LED or grounded models, please check with us first.
Cord & Switch
47″ / 1.2 m from plug to switch; 145″ / 3.7 m from switch to light (approx.).
The switch is on/off only. A compatible dimmable bulb can still be controlled by its remote while the switch is on.
Ordering
Sold only with a compatible pendant. Cord-only orders may be adjusted or canceled. Buying several pendants? Tell us which ones need a cord.
Hardwired Parts & Changes
Hardwired installation parts aren’t included with plug-in orders unless requested. Add a checkout note or contact us before ordering. If your light has shipped, ask us before adding a cord; extra shipping fees may apply.
Installation & Safety
Assembly required. Connect the cord correctly before use. If you’re not qualified to do the wiring, ask a licensed electrician. Use the hooks only with suitable anchors and surfaces, within their rated load. The connection needs proper strain relief and must not support the pendant’s weight.
For indoor use only. Keep the cord away from foot traffic and damage. Never run it through walls or ceilings.
Certification: SPT-2 power cord certified to UL 62 (File No. E494674). Certification covers the cord only, not the complete plug-in assembly or pendant.
Not sure whether your pendant is compatible? Contact us before ordering →
Shipping Made Simple
We’ve got you covered with easy and reliable shipping options:
- Free Standard Shipping (4-6 Weeks): Available for all orders in the US and Canada.
- Expedited Shipping (2-4 Weeks): Faster delivery is available—check our Shipping Policy for costs.
Hassle-Free Returns
Your satisfaction is our priority! If you’re not completely happy with your purchase, you can return it within 30 days in new and unused condition for a full refund. (Please note: Paid shipping fees are non-refundable as fulfillment has already been completed.)
To start a return, just email our support team at support@vinlighting.com, and we’ll walk you through the process step by step. For more details, visit our Returns Policy.
Shop with confidence, knowing we’re here to make things right!
