Washi Paper EN Series Pendant Light
Vin-CH14701
Use your table's width
Use the tabletop's shorter dimension; for a round table, use its diameter.
| Table width | Start with |
|---|---|
| 30–36" | 50EN |
| 40" | 50EN quieter · 70EN fuller |
| 42–48" | 70EN |
| 54" | 70EN quieter · 95EN fuller |
| 60–72" | 95EN |
Quieter and fuller describe visual size, not brightness. These are proportion examples; check ceiling clearance before choosing.
Relative shade sizes · simplified outlines
50EN
70EN
95EN
- 50EN → 70EN: 7.9" wider and 3.1" taller.
- 70EN → 95EN: 9.8" wider and 2.8" taller.
| Size | Diameter × height |
|---|---|
| 50EN | 19.7" Dia. × 9.8" H(50 × 25 cm) |
| 70EN | 27.6" Dia. × 13.0" H(70 × 33 cm) |
| 95EN | 37.4" Dia. × 15.7" H(95 × 40 cm) |
H is shade height only. The cord and canopy add to the installed drop.
Check ceiling clearance
Estimated minimum hardwired ceiling-to-bottom drop: 50EN 14.8" · 70EN 17.9" · 95EN 20.7".
Based on a 1" canopy, at least 10 cm of exposed cord and the shade height. Additional fittings may increase the drop.
- 8 ft ceiling over a 30"-high table: a 30–36" table-to-shade clearance leaves 30–36" for the total installed drop. Compare this with the estimates above.
- 8 ft ceiling with a walking area below: none keeps 7 ft of floor clearance at the minimum drop.
Have your installer confirm the final drop and sightlines.
Using several pendants?
For matching shades at the same height, add your chosen gap to the shade diameter. A 6" gap gives about 25.7" between 50EN centers, 33.6" for 70EN or 43.4" for 95EN. The gap is a styling example, not a required clearance.
- In stock, ready to ship
Spend more, save more
Pairs well with
The Washi Paper EN Series pairs a broad, flattened shade with light beige washi paper. Bamboo ribs support the shade from the inside, with their horizontal lines visible through the paper.
Hang it over a dining table to make the wide outline a focal point, or use it in a living area where you want diffused overhead light. Three sizes let you choose how much presence it has in the room; white wire blends with a white ceiling, while black wire makes the hanging line more visible.
50EN: 19.7" Dia. × 9.8" H (50 × 25 cm)
70EN: 27.6" Dia. × 13.0" H (70 × 33 cm)
95EN: 37.4" Dia. × 15.7" H (95 × 40 cm)
Standard · hardwired
Connects to a ceiling electrical supply. The 118" cord is adjustable during installation; ask before ordering if you need a longer cord or a custom canopy.
All three sizes for U.S. orders use one E26 socket and include one 20W, 3000K warm white, non-dimmable bulb. Use a standard on/off wall switch, sold separately.
Optional · plug-in cord
Sold separately for all three sizes. The 16.4 ft (5 m) cord has an inline on/off switch and comes with three mounting hooks. Choose US Plug and Black or White under Pairs well with.
The cord arrives unattached; assembly is required. Hardwired installation parts are not included with plug-in orders unless requested.
Assembly and ordering
Have a qualified installer connect the cord and plan the support. Use suitable anchors and surfaces within the hooks' rated load, with proper strain relief. The electrical connection must not carry the pendant's weight. Keep the cord out of foot traffic; do not run it through walls or ceilings.
Order the cord with the pendant. For multiple pendants, hardware requests or an order already shipped, follow PLUG-IN CORD ADD-ON for the full ordering conditions.
Dimming a hardwired setup
The included bulb must be replaced for dimming. Our remote-control bulb add-on is recommended for 50EN and 70EN. For 95EN dimming, choose a compatible E26 bulb with more light output than our remote-control bulb. Use controls matched to your chosen bulb.
Wall dimming · buy separately
Use a compatible dimmable E26 bulb and a matching wall dimmer. Check the bulb and dimmer together for U.S. 120V use; both are sold separately.
Remote-control bulb · 50EN / 70EN
The optional add-on replaces the standard bulb; the original bulb is not also included. Use the supplied remote for brightness and color temperature. Do not use this bulb with a wall dimmer, and keep power on for remote operation.
Add it through Pairs well with and check out with the fixture. See DIMMABLE BULB ADD-ON for quantities, compatibility and shipping conditions.
Hanging height and ceiling fit
Estimated minimum hardwired ceiling-to-bottom drop: 50EN 14.8" · 70EN 17.9" · 95EN 20.7". Estimates use the shade, 1" canopy and at least 10 cm of exposed cord; additional fittings may increase the drop.
Above a table or counter, start with 30–36" from the surface to the shade bottom. An 8 ft ceiling does not leave 7 ft of walking clearance with any of these sizes.
Sloped or vaulted ceilings are supported; have your installer check the mounting, final drop and sightlines.
For U.S. 120V use in indoor dry locations. Use a qualified installer and confirm ceiling support and cable routing.
Optional Remote-Control Bulb
Add Remote-Control Dimming to Your Light
Adjust brightness and switch between warm, neutral, and cool white with the included remote. No need to figure out the bulb base—we’ll match it to your compatible light fixture.
- Remote included
- 3000K / 4000K / 6000K
- Bulb base matched for you
How to Add It
-
Add a compatible light fixture to your cart.
-
On the fixture’s product page, find “Pairs well with” and select Remote-Control Dimmable Bulb.
-
Add the bulb and check out with both items.
What’s Included
Each add-on includes one compatible dimmable bulb and one remote control, shipped in the same package as your light. If your fixture normally comes with a standard non-dimmable bulb, we’ll send the dimmable one instead—the standard bulb won’t be included.
Brightness & Light Color
Use the remote to adjust brightness or choose one of three white-light settings:
- 3000KWarm WhiteSoft & cozy
- 4000KNeutral WhiteClean & balanced
- 6000KCool WhiteCool & crisp
Color samples are illustrative; the actual light may look different in your room.
The bulb isn’t designed for wall dimmer switches. Use the included remote while the fixture is powered on.
Details & Ordering
Compatibility
Recommended for compatible single-bulb fixtures, especially those 30″ or smaller. Larger fixtures may need more light. Not suitable for fixtures with built-in LEDs. For chandeliers or multi-bulb lights, please check with us first.
More Than One Light?
Ordering several lights? Leave a note at checkout telling us which one needs the bulb. For fixtures using multiple bulbs, contact us first to confirm quantity and compatibility.
Add-On Only
Available only with a compatible light fixture. Orders for the bulb alone may need to be adjusted or canceled.
Already Placed Your Order?
If your fixture has shipped, contact us before adding a bulb. Extra shipping fees may apply if it needs to be sent separately.
Not sure if this bulb will work with your light? Contact us before ordering →
Optional Plug-In Cord
Prefer a Plug-In Pendant?
Want to hang a pendant without hardwiring it to the ceiling? Our plug-in cord offers a convenient way to power compatible single pendant lights from a wall outlet.
- 5 m / approx. 196″ cord
- Inline on/off switch
- 3 mounting hooks included
How to Add It
-
Add your pendant light to your cart.
-
Under “Pairs well with”, select Plug-In Cord with Switch for Pendant Lights (5M / 196″).
-
Choose Black or White and your plug type (US Plug for U.S. outlets). Add the cord to your cart and check out with both items.
What’s Included
Your pendant and plug-in cord arrive in one package with three mounting hooks for routing the cord and supporting a compatible fixture. The cord arrives unattached and must be connected before use.
Details & Ordering
Compatibility
For compatible single-bulb pendants only. Not for chandeliers or multi-light fixtures. For integrated-LED or grounded models, please check with us first.
Cord & Switch
47″ / 1.2 m from plug to switch; 145″ / 3.7 m from switch to light (approx.).
The switch is on/off only. A compatible dimmable bulb can still be controlled by its remote while the switch is on.
Ordering
Sold only with a compatible pendant. Cord-only orders may be adjusted or canceled. Buying several pendants? Tell us which ones need a cord.
Hardwired Parts & Changes
Hardwired installation parts aren’t included with plug-in orders unless requested. Add a checkout note or contact us before ordering. If your light has shipped, ask us before adding a cord; extra shipping fees may apply.
Installation & Safety
Assembly required. Connect the cord correctly before use. If you’re not qualified to do the wiring, ask a licensed electrician. Use the hooks only with suitable anchors and surfaces, within their rated load. The connection needs proper strain relief and must not support the pendant’s weight.
For indoor use only. Keep the cord away from foot traffic and damage. Never run it through walls or ceilings.
Certification: SPT-2 power cord certified to UL 62 (File No. E494674). Certification covers the cord only, not the complete plug-in assembly or pendant.
Not sure whether your pendant is compatible? Contact us before ordering →
Shipping Made Simple
We’ve got you covered with easy and reliable shipping options:
- Free Standard Shipping (4-6 Weeks): Available for all orders in the US and Canada.
- Expedited Shipping (2-4 Weeks): Faster delivery is available—check our Shipping Policy for costs.
Hassle-Free Returns
Your satisfaction is our priority! If you’re not completely happy with your purchase, you can return it within 30 days in new and unused condition for a full refund. (Please note: Paid shipping fees are non-refundable as fulfillment has already been completed.)
To start a return, just email our support team at support@vinlighting.com, and we’ll walk you through the process step by step. For more details, visit our Returns Policy.
Shop with confidence, knowing we’re here to make things right!
