Washi Paper A Series Pendant Light
Vin-CH14601
Find your Washi Paper A Series size
Five sizes in a wide, low-profile shape, from 17.7 in to 37.4 in across. Choose a size for where it will hang, then check the height.
All five sizes drawn to the same scale, next to a 5 ft 6 in person.
1. Choose a size for where it hangs
Center of a room
Add the room’s length and width in feet. The total is a good starting width in inches. For a 12 × 14 ft room, 12 + 14 = 26, so look for about 26 in: the 21A.
| Room | Size | For a lighter look |
|---|---|---|
| 8 × 10 ft | 26A | — |
| 10 × 12 ft | 21A | 26A |
| 12 × 14 ft | 21A | 26A |
| 14 × 14 ft | 70A | 21A |
| 16 × 18 ft | 15A | 70A |
| 18 × 20 ft | 95A | 15A |
If you’re between two sizes, the smaller one is a safe choice. Larger sizes need a taller ceiling where people walk underneath (see step 2).
Over a dining table
Choose a shade about 1/2 to 2/3 the width of your table. For a round table, use its diameter.
| Table width | Good sizes |
|---|---|
| 30 in | 26A |
| 36 in | 26A or 21A (closest) |
| 42 in | 21A or 70A |
| 48 in | 21A or 70A |
| 54 in | 70A or 15A |
| 60 in | 15A or 95A |
| 72 in | 95A |
Long table? Use two or three pendants and center each one over an equal section of the table. For the largest shade per pendant, divide the table length by the number of pendants and subtract 12 in, then use whichever is smaller: that number or the width guide. Example: an 84 × 42 in table with 2 pendants gives 84 ÷ 2 − 12 = 30 in, so two 21A or 70A.
Over a kitchen island
The most compact size, 26A, suits a counter. Use two or three, centered over equal sections of the island, keeping each shade at least 6 in from the ends of the island. Hang them 30–36 in above the countertop.
Entryway
Most entries call for a compact shade. People walk directly under it, so check the ceiling height too.
| Entry | Size |
|---|---|
| Up to 8 × 10 ft | 26A |
| 10 × 12 ft or larger | 21A |
With an 8 ft ceiling, no size leaves 7 ft of clearance underneath. Choose a spot off the main walking path, such as over a console table. With a ceiling of 9 ft or higher, every size does.
2. Check the height
On this page, drop means the distance from the ceiling to the bottom of the shade. Each size has a shortest possible drop, listed in the size chart.
Where people walk
Keep at least 7 ft (84 in) from the floor to the bottom of the shade.
| Ceiling | Largest size |
|---|---|
| 8 ft | None: hang it over furniture instead |
| 9 ft or higher | All sizes |
Based on each size at its shortest drop.
Over a table or island
Over a 30 in dining table, aim for 30–36 in above the tabletop with an 8 ft ceiling, and add about 3 in for each extra foot of ceiling. Over a 36 in counter, aim for 30–36 in. Find your ceiling height below. The drop is the number to give your installer.
| Ceiling | Dining table drop | Island drop |
|---|---|---|
| 8 ft | 30–36 in | 24–30 in |
| 9 ft | 39–45 in | 36–42 in |
| 10 ft | 48–54 in | 48–54 in |
| 11 ft | 57–63 in | 60–66 in |
| 12 ft | 66–72 in | 72–78 in |
Every size can hang within these ranges.
3. Size chart
All 5 sizes and shortest drops
| Size | Width | Shade height | Shortest drop |
|---|---|---|---|
| 26A | 17.7 in45 cm | 9.8 in25 cm | 14.8 in |
| 21A | 25.6 in65 cm | 11.0 in28 cm | 16.0 in |
| 70A | 27.6 in70 cm | 12.6 in32 cm | 17.6 in |
| 15A | 34.6 in88 cm | 13.8 in35 cm | 18.8 in |
| 95A | 37.4 in95 cm | 15.7 in40 cm | 20.7 in |
Shortest drop = shade height + 1 in canopy + at least 4 in (10 cm) of cord, measured from the ceiling to the bottom of the shade. Model names don’t follow size order: 15A, for example, is 34.6 in wide.
Before you order
- Cord: 118 in standard. Your installer shortens it on site. Need it longer? Contact us before ordering.
- Canopy: 4.7 in. Other sizes are available on request.
- Installation: Hardwired by default; we recommend a licensed electrician. Prefer plug-in? The optional plug-in cord (196 in) has a built-in bulb socket, an inline switch and 3 mounting hooks, and needs no electrical wiring.
- Light: Every size uses one E26 bulb. In a larger room, pair it with lamps for reading or task light.
- Dimming: Optional dimmable bulbs are sold separately: a remote-control bulb, or a TRIAC bulb for most U.S. wall dimmers. Recommended for 26A, 21A or 70A. For 15A or 95A, contact us first.
- Sloped ceiling: Suitable for flat, vaulted or sloped ceilings.
- Indoor use: Dry locations only.
Questions about sizing? Email support@vinlighting.com.
15% off every order 25% off $1,999+
- In stock, ready to ship
Pairs well with
The Washi Paper A Series has a wide, shallow shade with gently rounded edges. Light filters through the paper for a soft ambient glow above a dining table or seating area.
Choose a smaller shade to keep the look subtle, or a larger one when you want it to draw more attention. Use Compare sizes to narrow the options for your table.
26A: 17.7" Dia. × 9.8" H (45 × 25 cm)
21A: 25.6" Dia. × 11.0" H (65 × 28 cm)
70A: 27.6" Dia. × 12.6" H (70 × 32 cm)
15A: 34.6" Dia. × 13.8" H (88 × 35 cm)
95A: 37.4" Dia. × 15.7" H (95 × 40 cm)
Shade dimensions only. Allow additional space for the canopy and hanging drop.
Hardwired · Standard
Connects to your ceiling wiring and turns on and off with a standard wall switch (not included). Have a licensed electrician make the connection and mount the fixture.
The 118" cord is shortened to your hanging height during installation. Need it longer? Contact us before ordering.
Plug-in · Optional add-on
No electrical wiring needed. The cord has a built-in bulb socket: fit it into the shade with the included guide, hang the light, and plug it into a wall outlet. It's a 16.4 ft (5 m) cord with an inline on/off switch.
About 47" runs from the plug to the switch and 145" from the switch to the light. Three mounting hooks are included for hanging the light and routing the cord.
Choose a cord color and plug type (US, EU, UK or AU) when you add it to your order. Plug-in orders ship without the hardwired parts. Want them too? Add a checkout note. Details are in the Plug-In Cord Add-On section.
Check the hanging space
- Shortest hardwired drop: the shade height plus about 5" (a 1" canopy and at least 4" of cord). Compare sizes lists it for each size.
- Over a table or island: start with 30–36" between the surface and the bottom of the shade.
- Where people walk underneath: keep at least 7 ft from the floor to the bottom of the shade.
- Ceiling type: suitable for flat, vaulted or sloped ceilings.
Mounting hardware is included. Your electrician may add anchors suited to your ceiling.
For dry indoor spaces. Handle the paper shade gently. If parts are missing or damaged, or the socket feels loose, stop and contact us before installing or using the light.
Optional Dimmable Bulb
Add dimming to your light
Choose a remote-control bulb with three light colors, or a warm white bulb for your wall dimmer. We’ll match the bulb base to your fixture.
- Two bulb options
- Base matched to your fixture
- Replaces the standard bulb
Choose your bulb
Remote bulb light settings
- 3000KWarm whiteSoft and cozy
- 4000KNeutral whiteClean and balanced
- 6000KCool whiteCool and crisp
Color samples are illustrative; the actual light may look different in your room.
How to add it
-
Add a compatible light fixture to your cart.
-
On the fixture’s product page, find “Pairs well with” and select Remote-Control Dimmable Bulb.
-
Choose the remote bulb or the TRIAC bulb, then check out with both items.
What’s included
Each add-on includes one dimmable bulb, shipped in the same package as your light. The remote bulb comes with its own remote. If your fixture normally comes with a standard bulb, we’ll send the dimmable one instead; the standard bulb won’t be included.
Remote batteries are included with standard shipping. Orders shipped by air can’t include batteries.
Details and ordering
Compatibility
Recommended for single-bulb fixtures up to 30″ in diameter. Larger fixtures may need more light. Not suitable for fixtures with built-in LEDs. For chandeliers or multi-bulb lights, please check with us first.
More than one light?
Each remote controls one bulb, so every remote bulb comes with its own remote. Ordering several lights? Leave a note at checkout telling us which ones need a bulb.
Add-on only
Available only with a compatible light fixture. Orders for the bulb alone may need to be adjusted or canceled.
Already placed your order?
If your fixture has shipped, contact us before adding a bulb. Extra shipping fees may apply if it needs to be sent separately.
Not sure which bulb suits your light? Contact us before ordering →
Optional Plug-In Cord
Prefer a plug-in pendant?
Hang a compatible pendant without ceiling wiring. This cord has a built-in bulb socket and an inline switch, so the light runs from any wall outlet.
- No electrical wiring
- 5 m / approx. 196″ cord
- Inline on/off switch
- 3 mounting hooks included
How to add it
-
Add your pendant light to your cart.
-
Under “Pairs well with”, select Plug-In Cord with Switch for Pendant Lights (5M / 196″).
-
Choose black or white and your plug type: US, EU, UK or AU. Add the cord to your cart and check out with both items.
What’s included
Your pendant and plug-in cord arrive in one package with three mounting hooks. The cord arrives separate from the light. Fit its socket into the pendant following the included guide, add the bulb, hang the light and plug it in.
Details and ordering
Compatibility
For compatible single-bulb pendants only. Not for chandeliers or multi-light fixtures. For integrated-LED or grounded models, please check with us first.
Cord and switch
47″ / 1.2 m from plug to switch; 145″ / 3.7 m from switch to light (approx.).
The switch is on/off only. A compatible dimmable bulb can still be controlled by its remote while the switch is on.
Ordering
Sold only with a compatible pendant. Cord-only orders may be adjusted or canceled. Buying several pendants? Tell us which ones need a cord.
Hardwired parts and changes
Plug-in orders ship without the hardwired installation parts. Want them too? Add a checkout note or contact us before ordering. If your light has shipped, ask us before adding a cord; extra shipping fees may apply.
Setup and safety
No electrical wiring needed. Follow the guide that comes with your pendant to fit the socket and hang the light. Use the hooks with anchors suited to your ceiling or wall.
For indoor use only. Keep the cord away from foot traffic and damage, and never run it through walls or ceilings.
Certification: The SPT-2 cord wire is certified to UL 62 (File No. E494674). This covers the wire only, not the plug, switch, socket or the assembled light.
Not sure whether your pendant is compatible? Contact us before ordering →
Shipping Made Simple
We’ve got you covered with easy and reliable shipping options:
- Free Standard Shipping (4-6 Weeks): Available for all orders in the US and Canada.
- Expedited Shipping (2-4 Weeks): Faster delivery is available—check our Shipping Policy for costs.
Hassle-Free Returns
Your satisfaction is our priority! If you’re not completely happy with your purchase, you can return it within 30 days in new and unused condition for a full refund. (Please note: Paid shipping fees are non-refundable as fulfillment has already been completed.)
To start a return, just email our support team at support@vinlighting.com, and we’ll walk you through the process step by step. For more details, visit our Returns Policy.
Shop with confidence, knowing we’re here to make things right!
