Glass Petal Pendant Light - Installation and Dimming
Hardwired ceiling pendant
For U.S. 120V use in indoor dry locations. The 78" cord can be shortened during installation; request a longer cord before ordering if needed.
On/off · included bulb
One E26 socket with one 5W, 3000K warm white bulb, included with every glass option for U.S. orders. The bulb is not dimmable. Use a standard on/off wall switch, sold separately.
Want wall dimming?
Replace the included bulb with a compatible dimmable E26 bulb for U.S. 120V use, and use a matching wall dimmer. Both are sold separately; check bulb and dimmer compatibility together.
Want a remote control?
The optional add-on adjusts brightness and color temperature by remote. It includes a compatible bulb and remote, replacing the standard bulb; the original bulb is not also included. Do not use it with a wall dimmer. Keep power on to operate the remote.
Add it through Pairs well with and check out with the fixture. For several pendants or a fixture order already shipped, follow DIMMABLE BULB ADD-ON for quantities and ordering conditions.
Before installation
Have an electrician check the ceiling box, mounting support and cable route. Mounting hardware is included; suitable anchors or fasteners may still be needed for your ceiling.
Sloped ceilings are supported. Have the installer verify the mounting and hanging position for your ceiling.
The 7.9" shade height excludes the cord and canopy. Check the available total drop before choosing this light for a low ceiling.
Hanging-height starting points
- Above a table or island: start with 30–36" between the surface and the bottom of the shade.
- Over an open walking area: allow at least 7 ft from the floor to the bottom of the shade.
Check sightlines, ceiling height and the complete installed drop with your electrician.