Akari D Series Pendant Lamp - Installation options

Included setup

Hardwired

  • Connects to ceiling wiring and a standard wall on/off switch. Switch not included.
  • 118" adjustable cord. Your installer sets the drop.
  • Includes mounting hardware and one non-dimmable 3000K E26 bulb.
  • Have a qualified electrician install the fixture.

Sold separately · all 10 sizes

Plug-in

  • Powers the pendant from a wall outlet.
  • Add the plug-in cord to the same order. Choose Black or White and US Plug.
  • 5 m / approx. 196" cord, inline on/off switch and three mounting hooks.
  • The cord arrives unattached. Assembly and proper support are required; use a qualified electrician for wiring.

For remote dimming, the optional bulb-and-remote set replaces the standard bulb. Use its remote, not a wall dimmer. Recommended for 30D–75D; not recommended for 80D, 100D or 120D. For those sizes, choose a higher-output compatible dimmable E26 bulb and matching controls, within the 40W actual-wattage limit.

Before ordering a plug-in cord

Hardwired installation parts are not included with plug-in orders unless requested. Leave a checkout note if you need them. Ordering several pendants? Tell us which ones need a cord.

After your fixture ships, contact us before adding a cord; separate shipping fees may apply. The cord is an add-on and is not sold on its own.

Use suitable anchors and surfaces within their rated load. The electrical connection needs proper strain relief and must not carry the pendant's weight. Keep the cord out of foot traffic; never run it through walls or ceilings. Indoor dry locations only.

Check the hanging height

For standard hardwired installation, the shortest drop is the shade height plus a 1" canopy and 10 cm / approx. 3.9" exposed cord. Shade height alone is not the total installed drop. See Compare sizes for each model's minimum drop.

For a sloped ceiling or a longer cord, contact us before ordering to check the mounting arrangement and length. The standard hardwired drop calculation does not cover plug-in routing or sloped ceilings.