Akari D Series Pendant Lamp
Vin-CH02513
Find a size for your bedroom, living room, entryway or dining area. Start with these room ideas, then adjust the space and pendant dimensions below.
Bedroom
50D–60D
12 × 14 ft · 168 sq ft / 15.6 m²
Example ceiling: 10 ft
Shown: 55D · 7 ft floor clearance
Center it over the bed or in the room, clear of closet doors.
Living room
75D–80D
14 × 16 ft · 224 sq ft / 20.8 m²
Example ceiling: 10 ft
Shown: 75D · 7 ft floor clearance
Use it to anchor a seating area. Add reading light where needed.
Entryway
30D–45D
10 × 12 ft · 120 sq ft / 11.1 m²
Example ceiling: 10 ft
Shown: 40D · 7 ft floor clearance
A small focal point near the door. Check the door swing and walking route.
Sketches show cropped room views at one scale. Room areas are layout examples, not lighting coverage ratings. Plan for at least 7 ft below the shade where people walk; confirm the final position with your installer. For a larger living area or foyer, consider 100D–120D in an 18 × 20 ft layout (360 sq ft / 33.4 m²) with a 12 ft ceiling.
The Contrast Between the Chandelier and the Space
Room width is the wall-to-wall span shown in front view. Suspension drop is measured from the ceiling to the top of the shade, including the canopy. Furniture stays the same size as you adjust the room.
30D40D45D50D55D60D75D80D100D120D
BedroomLiving roomEntrywayDining room · front view
Bed and nightstands: 100 in overall width.Sofa: 90 in wide.Console, mirror and plant: 60 in overall width.Table: 42 in wide × 30 in high; two chairs. Allow space to pull out the chairs.
Your selected proportions
- Shade diameter
- 11.8 in 30 cm16.5 in 42 cm17.7 in 45 cm19.7 in 50 cm21.7 in 55 cm24.0 in 61 cm29.5 in 75 cm31.5 in 80 cm39.4 in 100 cm47.2 in 120 cm
- Shade height
- 10.6 in 27 cm15.0 in 38 cm16.5 in 42 cm18.1 in 46 cm19.7 in 50 cm22.0 in 56 cm28.0 in 71 cm29.5 in 75 cm37.8 in 96 cm45.3 in 115 cm
- Ceiling to shade top
- 6 in9 in12 in15 in18 in24 in30 in36 in
- Floor to shade bottom
- Tabletop to shade bottom
A small accent for a breakfast nook or compact entry.A compact option for a bedroom, entry or smaller dining table.A modest focal point for a bedroom, entry or breakfast area.Consider it for a bedroom, reading area or everyday dining.A fuller look for a bedroom, seating area or dining table.More presence in a spacious bedroom or dining area.Consider it for a living room or a broad dining table.A focal point for a larger living or dining space.For a large living area or foyer with a high ceiling.The largest option for an open living area or tall foyer.
Check walking clearance. This leaves less than 7 ft below the shade. Try a shorter drop or a smaller shade.
Low over the table. There is less than 30 in between the tabletop and shade. Try a shorter drop or a smaller shade.
High over the table. There is more than 36 in between the tabletop and shade. Try a longer drop if you want it closer to the table.
The illustrated bed and nightstands are wider than this room. Use a narrower furniture arrangement.
The drawing shows the selected room width and ceiling height, not a floor plan or a lighting coverage estimate. Furniture dimensions are fixed references. Measurements are rounded to 0.1 in; confirm the final position on site.
Your browser cannot show the interactive room view. Open “All 10 sizes & minimum drops” below to compare measurements.
All 10 sizes & minimum drops
| Model | Diameter | Shade height | Min. drop |
|---|---|---|---|
| 30D | 11.8 in30 cm | 10.6 in27 cm | 15.6 in39.54 cm |
| 40D | 16.5 in42 cm | 15.0 in38 cm | 19.9 in50.54 cm |
| 45D | 17.7 in45 cm | 16.5 in42 cm | 21.5 in54.54 cm |
| 50D | 19.7 in50 cm | 18.1 in46 cm | 23.1 in58.54 cm |
| 55D | 21.7 in55 cm | 19.7 in50 cm | 24.7 in62.54 cm |
| 60D | 24.0 in61 cm | 22.0 in56 cm | 27.0 in68.54 cm |
| 75D | 29.5 in75 cm | 28.0 in71 cm | 32.9 in83.54 cm |
| 80D | 31.5 in80 cm | 29.5 in75 cm | 34.5 in87.54 cm |
| 100D | 39.4 in100 cm | 37.8 in96 cm | 42.8 in108.54 cm |
| 120D | 47.2 in120 cm | 45.3 in115 cm | 50.3 in127.54 cm |
Minimum drop is measured from ceiling to shade bottom: shade height + a 1 in canopy + at least 10 cm of exposed cord. Inch minimums are rounded up to 0.1 in. The standard 118 in cord can be shortened during installation.
How to read the room view
Room width: the wall-to-wall width in front view, not the room’s floor area. Furniture stays at the stated reference size. Allow extra room for doors, drawers and chairs.
Suspension drop: ceiling to shade top, including a 1 in canopy. A 12 in setting leaves about 11 in of exposed cord. Increasing this value lowers the pendant.
Clearance: ceiling height − suspension drop − shade height. In the dining view, subtract another 30 in for the tabletop. Around 30–36 in above a dining table is a starting point; check sightlines and adjust for your ceiling and table.
Select any of the 10 models to compare its proportions. Sizes remain selectable when clearance is tight, so check the message alongside the drawing. Between presets, use the next lower ceiling height and the next longer drop for a cautious height check. The view assumes one hardwired pendant on a level ceiling; sloped ceilings and plug-in cords need a separate review.
- In stock, ready to ship
Spend more, save more
Pairs well with
The Akari D Series has a full, rounded shade of pale washi paper, supported from within by a bamboo frame. When lit, the paper diffuses the bulb's light for a soft glow.
Hang it over a dining table or in a living area where you want a softly glowing focal point.
30D: 11.8" Dia. × 10.6" H (30 × 27 cm)
40D: 16.5" Dia. × 15.0" H (42 × 38 cm)
45D: 17.7" Dia. × 16.5" H (45 × 42 cm)
50D: 19.7" Dia. × 18.1" H (50 × 46 cm)
55D: 21.7" Dia. × 19.7" H (55 × 50 cm)
60D: 24.0" Dia. × 22.0" H (61 × 56 cm)
75D: 29.5" Dia. × 28.0" H (75 × 71 cm)
80D: 31.5" Dia. × 29.5" H (80 × 75 cm)
100D: 39.4" Dia. × 37.8" H (100 × 96 cm)
120D: 47.2" Dia. × 45.3" H (120 × 115 cm)
Dia. = shade diameter. H = shade height, not the total installed drop.
For standard hardwired installation, add the canopy height (1") and at least 10 cm / approx. 3.9" of exposed cord to the shade height. See Compare sizes for each model's minimum installed drop.
Hardwired · Standard
Connects to ceiling wiring. Have a qualified installer make the electrical connection and secure the fixture.
The standard 118" cord can be shortened during installation. Contact us before ordering if you need a longer cord.
Plug-in · Optional add-on
Uses a wall outlet with a separate 16.4 ft (5 m) cord and inline on/off switch. Choose the cord color and US plug when adding it to the same order.
The cord arrives unattached and needs to be connected by a qualified installer. The pendant still needs secure overhead support and a clear cord route. Hardwired parts are not included with this add-on unless requested before shipment.
Check the hanging space
For the shortest standard hardwired drop, add 4.94" (12.54 cm) to the shade height: a 1" canopy plus at least 10 cm of exposed cord. This applies to all 11 sizes.
Above a table or island, start with 30–36" between the surface and the bottom of the shade. Use Compare sizes to check proportions and clearance. Open walkways need a separate clearance check by your installer.
An English installation guide is included in every package. Watch the installation video on the product page before assembly.
For dry indoor spaces. Handle the paper shade gently; do not force the support frame. If parts are missing or damaged, or the socket feels loose, stop and contact us before installation or use.
Optional Remote-Control Bulb
Add Remote-Control Dimming to Your Light
Adjust brightness and switch between warm, neutral, and cool white with the included remote. No need to figure out the bulb base—we’ll match it to your compatible light fixture.
- Remote included
- 3000K / 4000K / 6000K
- Bulb base matched for you
How to Add It
-
Add a compatible light fixture to your cart.
-
On the fixture’s product page, find “Pairs well with” and select Remote-Control Dimmable Bulb.
-
Add the bulb and check out with both items.
What’s Included
Each add-on includes one compatible dimmable bulb and one remote control, shipped in the same package as your light. If your fixture normally comes with a standard non-dimmable bulb, we’ll send the dimmable one instead—the standard bulb won’t be included.
Brightness & Light Color
Use the remote to adjust brightness or choose one of three white-light settings:
- 3000KWarm WhiteSoft & cozy
- 4000KNeutral WhiteClean & balanced
- 6000KCool WhiteCool & crisp
Color samples are illustrative; the actual light may look different in your room.
The bulb isn’t designed for wall dimmer switches. Use the included remote while the fixture is powered on.
Details & Ordering
Compatibility
Recommended for compatible single-bulb fixtures, especially those 30″ or smaller. Larger fixtures may need more light. Not suitable for fixtures with built-in LEDs. For chandeliers or multi-bulb lights, please check with us first.
More Than One Light?
Ordering several lights? Leave a note at checkout telling us which one needs the bulb. For fixtures using multiple bulbs, contact us first to confirm quantity and compatibility.
Add-On Only
Available only with a compatible light fixture. Orders for the bulb alone may need to be adjusted or canceled.
Already Placed Your Order?
If your fixture has shipped, contact us before adding a bulb. Extra shipping fees may apply if it needs to be sent separately.
Not sure if this bulb will work with your light? Contact us before ordering →
Optional Plug-In Cord
Prefer a Plug-In Pendant?
Want to hang a pendant without hardwiring it to the ceiling? Our plug-in cord offers a convenient way to power compatible single pendant lights from a wall outlet.
- 5 m / approx. 196″ cord
- Inline on/off switch
- 3 mounting hooks included
How to Add It
-
Add your pendant light to your cart.
-
Under “Pairs well with”, select Plug-In Cord with Switch for Pendant Lights (5M / 196″).
-
Choose Black or White and your plug type (US Plug for U.S. outlets). Add the cord to your cart and check out with both items.
What’s Included
Your pendant and plug-in cord arrive in one package with three mounting hooks for routing the cord and supporting a compatible fixture. The cord arrives unattached and must be connected before use.
Details & Ordering
Compatibility
For compatible single-bulb pendants only. Not for chandeliers or multi-light fixtures. For integrated-LED or grounded models, please check with us first.
Cord & Switch
47″ / 1.2 m from plug to switch; 145″ / 3.7 m from switch to light (approx.).
The switch is on/off only. A compatible dimmable bulb can still be controlled by its remote while the switch is on.
Ordering
Sold only with a compatible pendant. Cord-only orders may be adjusted or canceled. Buying several pendants? Tell us which ones need a cord.
Hardwired Parts & Changes
Hardwired installation parts aren’t included with plug-in orders unless requested. Add a checkout note or contact us before ordering. If your light has shipped, ask us before adding a cord; extra shipping fees may apply.
Installation & Safety
Assembly required. Connect the cord correctly before use. If you’re not qualified to do the wiring, ask a licensed electrician. Use the hooks only with suitable anchors and surfaces, within their rated load. The connection needs proper strain relief and must not support the pendant’s weight.
For indoor use only. Keep the cord away from foot traffic and damage. Never run it through walls or ceilings.
Certification: SPT-2 power cord certified to UL 62 (File No. E494674). Certification covers the cord only, not the complete plug-in assembly or pendant.
Not sure whether your pendant is compatible? Contact us before ordering →
Shipping Made Simple
We’ve got you covered with easy and reliable shipping options:
- Free Standard Shipping (4-6 Weeks): Available for all orders in the US and Canada.
- Expedited Shipping (2-4 Weeks): Faster delivery is available—check our Shipping Policy for costs.
Hassle-Free Returns
Your satisfaction is our priority! If you’re not completely happy with your purchase, you can return it within 30 days in new and unused condition for a full refund. (Please note: Paid shipping fees are non-refundable as fulfillment has already been completed.)
To start a return, just email our support team at support@vinlighting.com, and we’ll walk you through the process step by step. For more details, visit our Returns Policy.
Shop with confidence, knowing we’re here to make things right!
